47
Gutter and Downpipe Installation
11
Diagram 72
EV0740M
Pop the small rubber
blank (D214) into the
hole that is not required
(diagram 73).
D214
EV535M
You can now fit the cast
aluminium end stops
(diagram 74). These will
need a good amount of
silicone applied to
create the seal to the
gutter, any excess
should be removed
once in place. Fix with
one 25mm Pan Head
screw.
Diagram 74
If you want to connect the pipe to a waterbutt cut the
pipe appropriately and simply use the D207 joints to
divert the pipe. Its likely you will need to fix the
downpipe brackets higher up, again try to use a
standard capping screw location (diagram 72). If you
have the aluminium capping you may find you wish to
use an M6 nut to space the bracket out so the pipe
runs more inline with the greenhouse frame.
Diagram 73
Ex
ternal
Ex
ternal
Ex
ternal
