Alton SUMMERHOUSE MICKLETON, Instruction Manual

Page: 9 / 52

9
The positioning of the side panels is entirely flexible and
can be decided as you fit them, so for example if you
want an opening window in the rear corner of the
building you can. This instruction manual will show the
standard layout.
Take the first panel and position it at the rear of the
building, get a helper to hold this in place while you
position the next panel (diagram 9).
Diagram 9
ABA0027
Diagram 10
Dia. 11
Drill pilot holes with the 4mm drill
bit supplied at each point shown by
the arrows on diagram 10. Make
sure the panels line up perfectly on
the inside (diagram 11) before
fixing with 60mm passivated
screws.
Do
NOT fix the side panels to the
floor yet as this will make
construction hard later in the build.
ABA0037
Side Assembly
3