Alton SUMMERHOUSE MICKLETON, Instruction Manual

Page: 28 / 52

28
A
B0
15
0
Diagram 48
50mm
5
0
m
m
5
0
m
m
Roof Felting
Diagram 49
Once you have cut the first
one use this as your
template. Be careful when
moving it so as not to
damage it as you will want
to use this on the roof.
Just keep rotating the sheet until
you have 8 felt sheets cut ready to
install.
9
Take the role of roof felt (grit side down) and roll it out somewhere flat e.g. a
garage floor. Also it is a good idea to have a sheet of ply or something similar
to slide under the felt to protect the floor when cutting.
Lay the ply roof panel onto the felt as shown in diagram
48. Mark out 50mm from the edge all the way around it.
Use a Stanley knife to cut this out. If you use a straight
edge you will find this easier and get a much neater cut.
Diagram 47