Alton SUMMERHOUSE MICKLETON, Instruction Manual

Page: 34 / 52

34
Fascias and Capping
Now you can fit the capping working your way around the building. As you position each one, line
the end up with the outer point of the joint between fascias (diagram 62). When you are happy fix in
position with 50mm countersunk stainless steel screws. Only fix the bottom screw for now as you
will want to fix the top screw when all caps have been spaced equally.
38mm
Diagram 60
Before you can fix the roof capping in place you need to trim it to length (the full length capping is
used on the optional slatted roof). Trim the end with the bevel so the square end that goes at the
bottom of the roof is kept tidy and pre-treated.
DO NOT CUT THESE IF YOU HAVE A SLATTED ROOF
AB0056
10
Dia. 62
Quantity: 8
Diagram 61