3
Thank you for purchasing your new Alton summerhouse. We recommend you familiarise
yourself with the instructions and read all safety information before you commence assembly.
This instruction manual is also available online at
www.greenhousepeople.co.uk
in the
technical help section should you need to reprint it. Should you require any additional advice
you can always call us on 01782 385409.
Safety Warning
Glass and timber can potentially cause injury. Please ensure you wear protective goggles,
gloves, headgear and suitable footwear when assembling the building.
Please remember that glass is fragile and should be handled with extreme care. Always clear
up and dispose of any breakages immediately.
Do not assemble the summerhouse in high winds.
For safety reasons and ease of assembly, we recommend that this summerhouse is assembled
by a minimum of two people.
Please clear all lying snow from the summerhouse roof as it can cause the roof to buckle or
collapse.
Site Preparation
When selecting a site for your summerhouse, it is vital that you choose as flat and level an
area as possible.
A concrete or slabbed base will provide the most solid foundation for your summerhouse. A
slabbed base would be our preferred choice as this helps with drainage.
Avoid placing your summerhouse under trees or in other vulnerable locations.
To minimise the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a
hedgerow or garden fence.
Additional Considerations
If you have arranged for someone to install your summerhouse for you, please check that all
components are included. Most parts are numbered and can be identified by a stamp or
removable label. Alternatively, the components can be identified by lengths detailed in the
packing list in your main cardboard box.
Remember this is a natural timber product, the wood may soak up some water and some
staining may occur. Your summerhouse is factory dipped in a clear spirit based preservative.
We recommend that you re-apply some clear treatment annually particularly on the most
exposed areas. If you want to avoid this and give your summerhouse a more permanent
finish you could apply an oil based product (refer to manufacturers recommendations for
recoating).
Introduction
Summary of Contents for SUMMERHOUSE MICKLETON
