42
15
12mm
12mm
Dia. 73
Diagram 72
Diagram 73
AB0093
AB0091
Finally you need to fit the architrave
on the inside of the door frame.
Measure 12mm from the inside face
of the door frame (diagram 74) and
make a mark at the top and bottom
on each side. Line the first piece up
with these marks, with the end of the
architrave sitting on the floor boards
and fix in place with four panel pins
at the points shown above. Repeat
this on the opposite side, the top
section should then sit neatly on top.
This can then be fixed with three
panel pins.
Architrave fitting
