33
Fascias and Capping
Finish fixing the capping with the final 2 screws per strip. Once fixed in place you can trim any excess
felt. Be very careful not to cut through both layers of roof felt. Scoring down the side of the capping
a couple of times lightly is much safer than trying to cut through in one go!
Now all the capping is fitted
and the felt is trimmed you
can move to
section 12.
10
Next fit the intermediate capping strips. Find the
centre of the fascia board and make a small mark
on the top edge so it can’t be seen from below.
Use this to position the bottom of the capping,
make sure the capping is running straight and fix
the bottom with a 50mm countersunk screw.
When you are happy the top is in the correct
position fix it in place.
Diagram 53
