LTO
LTO
TM
Edit Mode (Password Protection)
are not altered. In this case you will NOT be able to alter parameters via the PC EDITOR.
In the PC EDITOR, select
FILE > OPTIONS
and then the
LOCK
tab. This will present you with a menu.
TOTAL RECALL incorporates a password system and your installer may have set a password to ensure that vital settings
Full Edit:
This is the DEFAULT mode. No password is set at the factory. From here you can lock the unit by clicking within
the empty
Total Lock
button. A text box will open, allowing you to enter a password of your own choice. Click OK.
It is important that you remember this password.
the lock, click within the empty
Full Edit
button. A text box will open. Type the password used to set lock mode. Press OK.
Total Lock:
In this mode, no editing is allowed. To enable
Total Lock
, a password must be entered as above. To disable
Parameter Menus & System Set-up
Help File
The HELP FILE accessible from within the PC EDITOR will be updated as necessary. Since software updates after the printing
of this manual may affect the instructions provided here, please check the Help File for any later remarks.
Introduction to the PC EDITOR
Click on one of the icons on the welcome screen (system block diagram) of the PC EDITOR. A window will appear showing
one of several 'pages' where you can set the parameters using virtual knobs and sliders or by typing the values. Here is a
brief overview of the various 'pages' that make up the TOTAL RECALL PC EDITOR. Each is explained in more detail in the
next section.
Allows a delay to be applied in order to "time align" each output channel. Includes a graphical interface of 5 virtual speakers.
CHANNEL DELAY
:
2
2
HIGH PASS/LOW PASS FILTERS (HPF & LPF):
3
3
A High-Pass filter may be applied independently to each of the Front and Rear channels. A Low-Pass filter may be applied to
the Subwoofer channel.
