LTO
LTO
TM
Installation Instructions
If the Remote output from the Tape or CD player is already being used to switch on another unit that is
close to the TOTAL RECALL, it is usually possible to 'daisy-chain' a cable from the Remote terminal on
that unit to the REM terminal of the processor. This avoids the need to run a separate cable from the player.
USEFUL
USEFUL
TIP
TIP
The unit is protected by an internally mounted fuse which only your dealer or an authorized service agent
should replace if it becomes necessary. The replacement fuse must be of the same type and value as
originally fitted.
IMPORTANT
IMPORTANT
Before reconnecting power to the circuit, double check all connections are correct and secure. On turning on the CD
or Tape player, the power-on LED next to the power input terminal block of TOTAL RECALL should light to show the
unit is receiving power.
GROUND SWITCH
(bottom panel)
TOTAL RECALL is equipped with a Ground Switch. This alters the internal grounding arrangement within the device. In
almost all automotive applications, the switch should be in the LIFT position. In this position, the power and signal grounds
are fully isolated.
