LTO
LTO
TM
If your TOTAL RECALL has not been set-up yet
, or if you want to replace the existing set-up, you can create a new
named profile (NEW UNIT) within the PC EDITOR. Here's how:
GANGING*
option should generally be left at its default setting (unchecked).
Select
NEW UNIT
. In the window that appears, type a new name
for the unit you are creating (this is optional). The
Press
OK
and a window corresponding to the unit you have just named will open up with the DEFAULT configuration and
the block diagram.
Parameter Menus & System Set-up
USEFUL
USEFUL
TIP
TIP
changes are simultaneously applied to both channels. This is achieved via the
MODIFY UNIT
option in the
ACTIONS
menu of the PC EDITOR. However, if you intend to use the channel delay function for speaker
'time alignment' then you should NOT gang the channels.
*
Ganging:
The stereo outputs may be "ganged" (linked together) as Front and Rear stereo pairs, so that
IMPORTANT
IMPORTANT
Every time a DOWNLOAD is made to the TOTAL RECALL, the USER PRESETS in the internal memory are
overwritten. Selecting
OFFLINE
from the
ACTIONS
menu will cause the PC to be disconnected from the TOTAL
RECALL. Be aware that selecting
ONLINE
again will prompt the program to perform a new scan
of the network
happen, then you must initiate a new session by Closing the current window and then selecting NETWORK
SCAN (
File > New > Network Scan
) so that TOTAL RECALL UPLOADS to the PC.
Every time an UPLOAD is made, all the USER PRESETS stored in TOTAL RECALL are transferred to the correspon-
ding positions within the PC EDITOR.
Choose
ONLINE
from the
ACTIONS
menu and the PC will scan the serial port to verify that TOTAL RECALL is correctly
connected. The
NETWORK SCAN
window should show the system status (
UNIT CONNECTED
or
NOT CONNECTED
).
Pressing
OK
will cause
all the parameters set in the PC to be downloaded to the TOTAL RECALL. The
ONLINE
icon
will appear.
and automatically DOWNLOAD the settings from the PC
to TOTAL RECALL. If you do not wish this to
