Alto RMX2408DFX, Quick Start Manual

Page: 59 / 60

59
TECHNICAL SPECIFICATIONS
MONO INPUT CHANNELS
•
Microphone input: Electronically balanced, discrete input configuration
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD+N) 0.006% at +4dBu, 1kHz
•
Gain: 50dB (MIC)
•
SNR: (Signal to Noise Ratio) >90dB
•
Line input: Electronically balanced
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD+N) 0.04% at +4dBu, 1kHz
•
Gain: 30dB
STEREO INPUT CHANNELS
•
Line input: Unbalanced
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD+N) 0.006% at +4dBu, 1kHz
IMPEDANCES
•
Microphone input: 1.4k Ohm
•
Channel Insert return: 2.5K Ohm
•
All other inputs: 10k Ohm or greater
•
Tape out: 1k Ohm
•
All other outputs: 120 Ohm
EQUALIZATION
•
Hi shelving: +/–15dB @12kHz
•
Mid bell: +/–15dB @2.5kHz
•
Low shelving: +/–15dB @ 80Hz
DSP SECTION
•
A/D and D/A converters: 24-bit
•
DSP resolution: 24-bit
EFFECTS
•
Hall, Room, Vocal & Plate reverbs Mono & Stereo DELAY (Max delay time 650ms) Chorus, Flanger & Reverb
Modulations, delay, chorus, flanger combinations
•
Presets: 16
•
Controls: 16-position PRESET Selector; 16-position Variation selector
Clip LED; Mute Switch with LED indicator
OUTPUT
•
500W 2+500 2 Mode : 480 W 4 (EIAJ) @ 4 Ohm; 224 W 4(EIAJ) @ 8 Ohm
•
1000W 1+1000 1 Mode : 976 W 2 (EIAJ) @ 8 Ohm
•
500W 1(R)+500 1(L)+1000W(MONO) Mode : 521 W 2(EIAJ) @ 4 Ohm+937 W 1(EIAJ) @ 8 Ohm
POWER SUPPLY
•
Main voltage : 100-120 VAC~60 Hz 210-240 VAC~50 Hz
•
Fuse : 100-120 V: T15A 210-240 V: T10A
•
Inrush current at initial switch-on: 11.54 A
•
Inrush current after power supply interruption: 7.78 A
DIMENSIONS (W x D x H)
•
550mm x 220mm x 310mm (8.66" x 12.20" x 21.65")
NET WEIGHT
•
9.3 Kg (20.50 lb)
GROSS WEIGHT
•
12.1 Kg (26.67 lb)