b. Power Up Setting
After making your connections, turn on the system's power using this procedure:
Before turning on the
Verb's power, check if:
All connections have been made correctly.
The volume controls of the amplifier or mixer are turned down.
Insert the Power plug into the POWER input on the rear panel of the
Verb and plug
the power adapter into an AC outlet.
Turn on the power of the
Verb, pushing the ON/OFF button on the front panel.
Turn on the power of the amplifier/mixer, and adjust the volume.
4.2. Analog
a. Input Jack Wiring
8
Inputs
Outputs
LEFT/CH 1
RIGHT/CH 2
LEFT/CH 1
RIGHT/CH 2
LEFT/CH 1
LEFT/CH 1
RIGHT/CH 2
4. Installation & Connection
4.1 Audio Connections and Power Up
a. Audio Connections
c. Power Connector
- Power connector:
This is a plug for connecting the 9VAC power supply adaptor
provided by the manufacturer.
The connections between the
Verb and the other audio devices have to be
made using high quality cables so to prevent bad performances of the
Verb
itself. So it should be good to use low-capacitance shielded cables with a flexible
internal conductor. Connect the cables to the
Verb properly by observing the
following precautions:
Do not bundle audio cables with AC power cords.
Do not place audio cables and
Verb, near sources of electromagnetic inter-
ference such as transformers, monitors, computers, etc.
Always unplug cables by firmly grasping the body of the plug and pulling di-
rectly outward.
Do not place cables where they can be stepped on.
Avoid twisting the cable or having it make sharp, right angle turns.
The
Verb's [LEFT] INPUT jack is also mono input for the
Verb. If you only
connect a single mono cable to the [LEFT] INPUT jack, it will be also routed auto-
matically to the [RIGHT] INPUT. However, if we are using stereo input signals,
connecting a cable to the RIGHT INPUT jack, the automatic routing will be avoided
and the LEFT INPUT jack will feed only the LEFT INPUT, and the RIGHT INPUT
jack will feed only the RIGHT INPUT.