Alto-Shaam HALO HEAT ED2-48, Installation, Operation And Maintenance Manual

Page: 17 / 45

C A R E A N D C L E A N I N G
MN-28820 (Rev 3) • 07/17 • ED2 & EU2 Series Heated Display Case • 15
P R E V E N T A T I V E M A I N T E N A N C E C H E C K L I S T
DAILY CHECK LIST:
❏ Clean the display case and glass as detailed in this manual.
WEEKLY CHECK LIST:
❏
Tighten and inspect light bulbs.
MONTHLY CHECK LIST:
❏ Inspect end and front glass pieces for any signs of chips and cracks.
❏ Schedule service immediately if a crack or chip is noted.
❏
Test gas struts (full service cases only).
❏ Lift the front glass fully.
❏ Ensure glass remains suspended without dropping back down.
❏ If struts are not holding the glass in an upright position, schedule service as
soon as possible.
Always include both model and serial numbers in your correspondence
regarding the unit.
Company: _________________________________________
Model: _________________________________________
Serial Number: _________________________________________
Purchased From: _________________________________________
Date Installed: _____________ Voltage: __________________
Inspection Date: __________________________________________
SERIAL NUMBER IS REQUIRED FOR ALL INQUIRIES
List details of the failure(s) with the date they occured. (Leave blank if components are working properly)
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
Component: _____________________________________ Date (MM/DD/YY): ______________
COMPONENT FAILURE & REPLACEMENT
Preventative Maintenance Checklist