background image

# 8 9 1 / 3   •   I N S TA L L AT I O N / O P E R AT I O N / S E RV I C E   M A N U A L •  4.

I N S TA L L AT I O N

1.

An identification tag is permanently mounted
on the cabinet.

2.

Plug the unit into a properly grounded 
receptacle ONLY.  Arcing will occur when 
connecting or disconnecting the unit unless 
all controls are in the “OFF” position.  

3.

Position the unit so the cord is easily accessible
in case of any emergencies.  If necessary, a
proper receptacle or outlet configuration, as
required for the unit, must be installed by a
licensed electrician in accordance with 
applicable, local electrical codes.

230V:

To prevent an electrical shock hazard between the
appliance and other appliances or metal parts in
close vicinity, an equalization-bonding stud is 
provided. An equalization bonding lead must be 
connected to this stud and the other appliances /
metal parts to provide sufficient protection
against potential difference. The terminal is
marked with the following symbol.         

NOTE:

The appliance must be connected to an 
electrical circuit that is protected by an 
external GFCI outlet.

E l e c t r i c a l   I n s t a l l a t i o n

ELECTRICAL CONNECTIONS MUST 
BE MADE BY A QUALIFIED SERVICE 
TECHNICIAN IN ACCORDANCE WITH 
APPLICABLE ELECTRICAL CODES.

To avoid electrical shock, this 
appliance MUST be adequately 
grounded in accordance with local 
electrical codes or, in the absence of 
local codes, with the current edition 
of the National Electrical Code 
ANSI/NFPA No. 70.  In Canada, all 
electrical connections are to be made 
in accordance with CSA C22.1, 
Canadian Electrical Code Part 1 or 
local codes.

NEMA

6-20P

20A-250V 

PLUG

CEE

7/7

220-230V 

PLUG

NEMA

6-20P

20A-250V 

PLUG

CEE

7/7

220-230V 

PLUG

ELECTRICAL  – Model 10•18 COMBIMATE

VOLTAGE

PHASE

CYCLE

/

HZ

AMPS

kW

CORD

PLUG INCLUDED

at 208

1

50/60

13.2

2.8

at 240

1

50/60

15.4

3.7

at 230

1

50/60

14.7

3.4

NEMA

6-20

P

20A - 250V 

PLUG

CEE

7/7

220-230V 

PLUG

230

208-240

ELECTRICAL  – Model 12•20 COMBIMATE

VOLTAGE

PHASE

CYCLE

/

HZ

AMPS

kW

CORD

PLUG INCLUDED

at 208

1

50/60

14.4

3.0

at 240

1

50/60

16.2

3.9

at 230

1

50/60

14.8

3.4

230

208-240

ELECTRICAL  – Model 20•20 COMBIMATE

VOLTAGE

PHASE

CYCLE

/

HZ

AMPS

kW

CORD

PLUG INCLUDED

at 208

1

50/60

14.4

3.0

at 220

1

50/60

15.0

3.4

at 240

1

50/60

16.7

4.0

at 230

1

50/60

15.5

3.5

230

240

-

220

-

208

Summary of Contents for 10-18W







































Reviews: