Overview
7
AP-150 RGBW Par LED Luminaire
Installation & User’s Manual
INSTALLATION AND SET UP
Overview
The AP-150 RGBW Par LED Luminaire is designed as a portable Par fixture. The unit can be mounted via
a C-clamp (sold separately) or used on the ground using the fixture’s kickstand yoke.
Power Connection Warnings
Before performing any field wiring, refer to and read the warnings contained in
"Important Information"
on page 1
.
WARNING!
The AP-150 RGBW Par LED Luminaire should be connected to a constant circuit or a relay
device. It should never be connected to a dimmer or circuit controlled by a dimmer. Read
"Connecting
Power" on page 7
carefully on how to properly connect your fixture.
WARNING!
The maximum allowable input current is 20 Amps. Do not overload circuits! Luminaires must
be supplied by a branch circuit protected by a maximum 20 Amp circuit protector. Doit être alimenté par un
circuit de dérivation protégé par un maximum de 20 ampères circuit protecteur. Ne surchargez pas les
circuits!
WARNING!
When using the daisy-chain connection method, only connect your AP-150 RGBW Par LED
Luminaire to AC Output Connection of other AP-150 RGBW Par LED Luminaires. DO NOT CONNECT
OTHER TYPES OF LUMINAIRES OR DEVICES! The maximum allowable of number of AP-150 RGBW
Par LED Luminaires that can be daisy-chained on one power feed should not exceed the first fixture’s 16
Amp power rating.
Connecting Power
Units are powered via an AC input cable (sold separately, refer to
"Accessories" on page 5
for optional
AC input cables) from 100 to 240VAC, 50/60Hz and draw approximately 135 Watts of power.
Table 1
,
outlines the wire colors and their purpose.
Table 1: AC Input Wiring
See
Figure 2 on page 8
for wiring connections.
IMPORTANT!
The AP-150 RGBW Par LED Luminaire must be connected to and properly grounded to an
viable earth ground.
Wire Color
Purpose
Brown
or
Black
Main / (L)ine
Blue
or
White
(N)eutral
Green/Yellow
or
Green
Ground / Earth
