manualshive.com logo in svg

Altman AP-150, Hardware User'S Manual

Share
Download
Altman AP-150 Hardware User'S Manual Download Page 23

Main Menu

21

AP-150 RGBW Par LED Luminaire

Installation & User’s Manual

Calibration (Color Calibration)

Calibration (when turned on) sets the output to the factory setting for consistent colors between luminaires.
The output of the luminaire is reduced.

When Calibration is turned off (factory default), the luminaire’s output is not reduced. For full output of the
luminaire turn Calibration off.

Rset Hours (Reset User Hours)

Rset  Hours  will  set  the  user  hours  to  zero  (0).  This  setting  is  used  for  run  time  of  the  luminaire  per
production or rental. 

Note: Total fixture hours cannot be reset. Both user and fixture hours only record the

time the luminaire is plugged in and powered. Neither of these features record the on and off time of the
LED.

BL Off Time (Backlight Off Time)

BL  Off  Time  will  set  an  internal  timer  to  turn  off  the  backlight  to  the  LCD  display  and  the  status  LED
indicators will dim when the backlight turns off. The setting options are:

• ON (do not turn off LCD backlight)

• 5 S (turn off LCD backlight five seconds after the last button press)

• 10 S (turn off LCD backlight ten seconds after the last button press)

• 30 S (turn off LCD backlight thirty seconds after the last button press)

• 1 M ((turn off LCD backlight one minute after the last button press)

Factory Default

To enter into the Factory default page, remove DMX from the fixture, press and hold both the LEFT and 

RIGHT arrow buttons for five (5) seconds. Enter the Pass PIN (default is 4131).

Factory defaults can also be set via the control channel.

IMPORTANT!  

Resetting the fixture to factory defaults will erase any saved presets.

Protected

This setting has two options - No and Yes. If set to No, the luminaire can be returned to factory default
settings through the Load Factory (see below).

Load Factory

This setting has two options - No and Yes. If set to No, the luminaire will retain all user settings. If Yes is
selected,  the  unit  is  returned  to  factory  default  settings.  Once  Yes  is  selected,  the  luminaire  will
automatically reboot.

Summary of Contents for AP-150















































Reviews:

No comments

Brands by name

Popular brands

Load more brands