DMX Maps
27
AP-150 RGBW Par LED Luminaire
Installation & User’s Manual
Step 1. Choose a setting you would like to store.
Step 2. Set the control channel to the desired value from control channel.
Note:
These settings must be performed without any channel scaling between each of the DMX values. It
is recommended that either a direct key entry is done from the console or use control channel macros.
Step 3. Wait 3 seconds.
Step 4. Return control channel to 0.
RGBW 8 Bit Direct Mode Map
Table 7
shows the DMX mapping for RGBW 8 Bit Direct Mode.
Note:
If the zoom or fan settings are set to anything other than DMX via the control channel they will
default to Local (manual). If control of these channels are to be DMX controlled either set each to DMX
CONTROL via the control channel, RDM, or rear display.
Table 7: RGBW 8 Bit Direct Mode Map (10 Channels)
DMX
Channel
Channel
Description
DMX
Range
Description
1
Intensity
0 - 255
Control of Intensity Channel
2
Red
0 - 255
Control of Red LEDs
3
Green
0 - 255
Control of Green LEDs
4
Blue
0 - 255
Control of Blue LEDs
5
White
0 - 255
Control of White LEDs
6
Zoom
0 - 255
Zoom channel settings:
Narrow Zoom = DMX 0
Medium Zoom = DMX 127
Wide Zoom = DMX 255
Zoom stop settings:
VNSP (Very Narrow Spot) 12° = DMX 0
NSP (Narrow Spot) 26° = DMX 63
MFL (Medium Flood) 38° = DMX 127
WFL (Wide Flood) 50° = DMX 191
XWFL (Extra Wide Flood) 65° = DMX 255
7
Presets / Color Filters
0 - 255
Control of Presets and Color Filters:
Channel OFF (disabled) = DMX 0 - 4
Preset_1 = DMX 5 - 7
Preset_2 = DMX 8 - 10
Preset_3 = DMX 11 - 13
Preset_4 = DMX 14 - 16
Preset_5 = DMX 17 - 19
Preset_6 = DMX 20 - 22
Preset_7 = DMX 23 - 25
Preset_8 = DMX 26 - 28
Preset_9 = DMX 29 - 31
Preset_10 = DMX 32 - 34
Preset_11 = DMX 35 - 37
Preset_12 = DMX 38 - 40
Preset_13 = DMX 41 - 43
Preset_14 = DMX 44 - 46
Preset_15 = DMX 47 - 49
Preset_16 = DMX 50 - 52
Preset_17 = DMX 53 - 55
Preset_18 = DMX 56 - 58
Preset_19 = DMX 59 - 61
Preset_20 = DMX 62 - 64
Continued next page.
