MaxInSight Manual
15
Configur
in
g D
a
ta
Disp
lays
Use Shift+click to select multiple adjacent fields. Use Ctrl + click to
select multiple non-adjacent fields. Then click the Right-arrow button
to move them to the right-hand column. To remove fields, select them
and click the Left-arrow button. You can change the order of selected
fields by highlighting a field and clicking the Up or Down buttons.
3.
In the Row Count field, specify the number of rows to use to display
the fields you have selected. In the following example, six fields were
selected, and Row Count was set to 2:
Figure 1.
Data from a single workgroup is displayed
4.
If you have selected more than one workgroup, specify in the Rotate
Interval field how many seconds you want to display one workgroup
view before MaxInSight rotates to the next group’s view.
5.
In the Field Name panel, specify a font and a color for the field names.
6.
In the Field Value panel, specify a font and the maximum number of
digits to display in a field. If the field value is more than the maximum
number of digits specified, then "?" will be displayed. For example if
the maximum number of digits is set to 2 but the field value is 123, then
the content display on the view will be “1?”.
Note: Font color for the field value is set in the Alerting
Configuration dialog box (Configure > Configure Alerting).
7.
In the WG panel, specify a color for the workgroup number.
Configuring Simultaneous Row-Type Views of Multiple
Groups
To configure simultaneous row views of multiple workgroups, choose Add
> Add Multiple Workgroup View. The configuration dialog box for
multiple workgroup views is similar to that for a single workgroup display.
In this example, data
is configured to be
displayed in two
rows.
