background image

Phone Configuration

IP 705 Manual

27

Configuring IP Settings

Use these guidelines when manually configuring the IP settings:

• Ensure the default gateway IP address is on the same subnet as the host 

IP address.

• When inputting IP addresses into the IP 705, use the 

*

 key to enter 

periods. For example, 209.120.12.8 would be input as 209*120*12*8.

Assigning a Local IP Address

The IP address is the unique logical address identifying each host computer 
on a TCP/IP network. An IP address is a 32-bit number expressed as four 
decimal numbers from 0 to 255, separated by periods.

To assign an IP address, use the following steps:

1. Ensure that DHCP is disabled (refer to “Enabling/Disabling DHCP” 

on page 26).

2. Press the 

Menu

 button, scroll to NETWORK, then press the 

Enter

 

button.

3. Scroll to 

LOCAL ADDRESS

, and press 

Enter

.

4. Use the keys on the dial pad to enter a new IP address, using the * key 

to enter periods.

5. Press 

Enter

.

Assigning a TFTP Server

The default TFTP Server is set to 0.0.0.0.

To assign the TFTP server, use the following steps:

1. Press the 

Menu

 button.

2. Use 

/

 to select 

System

, then press the 

Enter 

button.

3. Scroll to 

TFTP Server

, and press 

Enter

.

4. Use the keys on the dial pad to enter the new TFTP server address, 

using the * key to enter periods, then press 

Enter

.

Summary of Contents for IP 705












































































Reviews: