16
IP 705 Manual
7. Connect the IP 705:
a. Connect the phone to the LAN that AltiServ is on.
b. Connect the handset to the handset port.
c. Connect the power plug to the DC port.
Note:
If you want to use Power over Ethernet, see “To Use IP 705
in Power over Ethernet Mode” on page 20.
8. Configure startup network settings:
If you are using DHCP, ensure that DHCP is enabled on the IP 705
phone:
Menu
> NETWORK > ENABLE DHCP > Yes. (DHCP is
enabled by default.)
If you are
not
using DHCP, you must configure these network settings
on the IP 705 after installing the phone on the network:
• Local IP address
• IP subnet mask
• Gateway IP address
9. Configure the AltiWare IP settings:
If you are using GateKeeper Auto Discovery, you do not need to
configure anything. Proceed to Step 9.
If you are
not
using GateKeeper Auto Discovery, you must manually
configure the AltiWare IP address setting into the IP 705 phone:
a.
Menu
>
SYSTEM >
Enter
.
b. Select
AW SERVER
, and press
Enter
.
c. Enter the AltiWare server address, using the * key to input periods,
and press
Enter
.
10. Activate the IP 705 extension from the IP phone:
a. With the handset onhook, press
#27
, then the
Enter
button.
b. Enter the extension number and password when prompted.
c. The phone will attempt to register, as shown in the LCD screen:
Summary of Contents for IP 705
