Altigen IP 705 Page 19 Administration Manual Download

Page: 19 / 75

IP 705 Manual

H A P T E R

Installation

This chapter describes local installation and remote installation of the
IP 705 phone.

Important Notes for Plug and Play

A plug and play feature enables the IP 705 phone to automatically discover
the AltiServ IP address.

• To use the plug and play feature, the user’s IP phone must be on the

LAN with AltiServ.

• There can be only one AltiServ on the LAN.

• An instance of AltiGen GateKeeper needs to be running on the LAN

and configured to point to the AltiWare system.

• GateKeeper Auto Discovery uses broadcast UDP packets, which work

in the LAN or VPN environment, but not through the public IP
network.

• The DHCP server must be up and running.

Local Installation

1. Gather network settings information (this information will be needed

to configure the IP 705):

• AltiWare server IP address

If you are not using GateKeeper Auto Discovery – needed for plug
and play – you will have to manually configure the AltiServ IP
address on your IP phones.

• IP 705 phone’s IP address

This address is needed if DHCP is

not

used. It can be obtained

from the system administrator.

• Firewall information

See “Firewall Considerations” on page 42, if a firewall is being
used in the AltiWare environment.

Summary of Contents for IP 705












































































Search results

Summary of Contents for IP 705

Reviews:

Related manuals for IP 705

Brands by name

Popular brands

Altigen IP 705, Administration Manual

Search results

Summary of Contents for IP 705

Reviews:

Related manuals for IP 705

Brands by name

Popular brands