Altigen IP 705 Page 29 Administration Manual Download

Page: 29 / 75

Installation

IP 705 Manual

3. On the second line of the LCD screen, the following messages are

displayed in succession:

—

CHECK MEMORY

(RAM checking state)

—

CHECK FW

(Firmware checking state)

—

INIT NETWORK

—

LOADING FW...

—

LOADING NOW.

—

Boot Done

—

INITIALIZING

—

Version 060D.010B.1442

If the phone successfully passes through these stages, it has started up
properly. If it doesn’t, refer to “Troubleshooting” on page 43.

Other Phone Already Logged On To Extension

If another analog phone or IP phone is already logged on to the same
extension, rebooting the IP 705 will not register the phone successfully.
The user must press

#27

on the IP phone to actively log on to AltiServ.

After the extension is logged on and activated, the calls are redirected to
this IP phone.

Important:

The user should not use the VM option to log on to the IP 705

phone.

Executing Plug and Play After IP Phone is

Started

If you have already started the IP phone and want to execute the plug and
play feature, perform the following steps:

1. Power up the IP phone (the phone should be in Basic mode).

2. Press the

Menu

button.

3. Press

* * 2

then the

Enter

button to restore default settings.

Summary of Contents for IP 705












































































Search results

Summary of Contents for IP 705

Reviews:

Related manuals for IP 705

Brands by name

Popular brands

Altigen IP 705, Administration Manual

Search results

Summary of Contents for IP 705

Reviews:

Related manuals for IP 705

Brands by name

Popular brands