8
IP 705 Manual
AltiGen IP Phone Service
AltiGen IP Phone Service is installed together with AltiWare and connects
to AltiWare through enhanced A protocol on behalf of IP 705
phones. This service must be running for the IP 705 to operate. If IP Phone
Service stops while the IP 705 is on a call, the call will be disconnected.
Plug and Play Feature
The IP 705 supports a plug and play feature when running AltiWare. When
the phone is first booted up, this feature enables the phone to automatically
discover the AltiServ IP address, instead of having to program the phone
manually. Refer to “Important Notes for Plug and Play” on page 9 for
requirements and setup.
Note:
The plug and play feature requires AltiGateKeeper Discovery and
a single gatekeeper on the LAN.
Basic Mode
The IP 705 operates in Basic mode if it fails to register with AltiWare
during startup. When in Basic mode, the IP phone’s LCD display shows
(BASIC) IDLE
. No AltiWare switching features are available in this
operating mode. However, the phone user can enter a destination IP address
followed by
#
, and make an outgoing call through the IP network to reach
AltiWare or another IP 705 phone. Also, the IP phone can accept incoming
calls originating from AltiWare or another IP 705 phone.
Normal Operation
In normal operating mode, the IP 705 should have been registered with the
phone server and logged in as an extension. The time and extension appear
in the LCD screen and all phone features are enabled.
Note:
To enable the IP 705 to work in normal operating mode, open the
firewall port 10032 for the phone server. Refer to the
AltiWare OE/
ACC System Installation & Administration Manual
or
ACM
System Administration Manual
for information on other firewall
ports for H.323.
Summary of Contents for IP 705
