Altigen 710 User Manual Download Page 38

Page: 38 / 56

IP 710 Manual

Program-

mable Key*

•

N/A

•

BLF

•

Feature
Code

•

Admin
Defined #

•

Line Park

•

Call
Record

•

Workgroup
Status

•

User
Defined #

Press the appropriate key (keys 1-15) to initiate one of the
following functions

pre-assigned

by the system administrator:

Busy Lamp Field, AltiServ Feature Code, Admin Defined #,
Line Park, Call Record, Workgroup Status, User Defined #.

To configure a programmable key with User Defined # enabled:

Press the

Menu

button, select PHONE SETTING, and

press the

Enter

button.

Scroll to PROGRAM KEYS and press

Enter

Select the key to program, and press

Enter

Enter the appropriate digits for the speed dial number or
feature code, and press

Enter

The digits are automatically dialed when this function key is
pressed.

Speaker

To use the speakerphone:

1) Press the

Speaker

button.

2) To disconnect the call, press the

Speaker

button again.

Speed Dial*

1) Press the

Speed Dial

button to see a list of phone numbers

configured by the system administrator.

2) Use





to scroll to the desired entry.

3) Press the

Enter

button to dial the number.

Transfer*

During a call:

1) Press the

Transfer

button, which places the call on hold.

2) Dial the number you want to transfer the call to.

3) Hang up if the party answers the call, or press

Transfer

again to complete transferring.

4) If the party refuses the call, return to the original call by

pressing the



button or the

Flash

button.

Voice Mail

1) Press the

Voice Mail

button.

2) Enter voice mail password.

•

The Message Waiting light blinks when a voice mail
message is waiting.

•

The LCD displays the new voice mail count (which includes
only unheard messages) when onhook.

Function

Key Sequence

Summary of Contents for 710

























































Search results

Summary of Contents for 710

Reviews:

Related manuals for 710

Brands by name

Popular brands

Altigen 710, User Manual

Search results

Summary of Contents for 710

Reviews:

Related manuals for 710

Brands by name

Popular brands