manualshive.com logo in svg

Altigen 710, User Manual, Page: 28 / 56

Share
Download
Altigen 710 User Manual Download Page 28

20     

IP 710 Manual

 

Registration from the Phone’s Menu

Under normal circumstances, the IP 710 phone registers itself 
automatically. However, if registration failed for some reason (for 
example, the server was not available), registration can be started again 
from the IP 710 phone’s menu: 

1. Press the 

Menu

 button.

2. Scroll to 

REGISTER

.

3. Press the 

Enter

 button.

Configuring IP Settings

An IP address is a unique logical address that identifies each host computer 
on a TCP/IP network. An IP address is a 32-bit number expressed as four 
decimal numbers from 0 to 255, separated by periods.

Use these guidelines when manually configuring the IP settings:

• Ensure the default gateway IP address is on the same subnet as the host 

IP address. Check with your system administrator.

• When inputting IP addresses into the IP 710, use the 

*

 key to enter 

periods. For example, 209.120.12.8 would be input as 209*120*12*8.

Gateway

Network > 

 

Gateway

Sets the default Gateway IP address.

For H.323 version of phone firmware only:

Enable 
GateKeeper

Network > 

 

Enable GK 

Sets whether GateKeeper is enabled 
or disabled. 

GateKeeper 
Discovery

Network > 

 

GK Discovery

Sets whether GateKeeper discovery is 
enabled. IP phone will automatically 
find GateKeeper. Shows only if 
GateKeeper is enabled.

NAT Address

Network > 

 

NAT Address

Sets the NAT server’s public IP 
address.

Setting

Menu Path

Description

Summary of Contents for 710

























































Reviews:

No comments