16
AlterG Installation Manual
105440 rev C
Installing the Stanchion Assembly
1.
Remove one of the 2 x 6 boards from
the crating and place on top of a
furniture dolly to support the stanchion
assembly.
2.
Remove the plastic front panel from the
stanchion assembly. You may also want
to remove the front rails and panels to
avoid scratches. Place the unit on the
dolly as shown. Wheel the unit to the
installation location.
Note: If the site does not allow use of a dolly
or similar moving aid, the assembly can be
moved by hand. When moving by hand, have
plenty of help and lift the unit only by the
stanchions. Lifting by any other component of
the assembly can result in damage to the unit.
3.
Place the stanchion assembly over
the treadmill base.
Note: Lower it
in from the top or bring it in from
the rear to avoid damaging the
load cell cables. Do not slide it in
from the front of the unit.
Caution
: You may be injured or damage the product if you fail to
follow the procedures and safety tips outlined in this document
