15
AlterG Installation Manual
105440 rev C
Base Assembly
1.
Clean any debris off of the surface of
the base.
2.
Place the treadmill onto the base.
3.
Ensure the treadmill rear supports
are installed properly in the rear
restraints of the base.
The support
should be centered in the restraint
front to back and side to side. It
should not bind in the restraint.
4.
Ensure the front elevation wheels of
the treadmill are properly oriented
between the front guides on the
base and that they are sitting
squarely on the load cells.
Note:
The wheels should not ride up on
the top of the guides.
5.
Remove the blue tape from each
corner of the base and pull out the
black plastic rods and place aside.
