MAX 10 FPGA 10M50 Evaluation Kit Overview
1
2016.02.29
UG-20006
Subscribe
Send Feedback
The MAX
®
10 Evaluation Kit (P/N : EK-10M50F484) provides an easy-to-use platform for evaluating the
MAX 10 FPGA technology and Enpirion
®
PowerSoC regulators. You can use this kit to do the following:
• Develop designs for the 10M50, F484 package FPGA
• Validate MIPI CSI-2 passive solution for both MIPI transmitter and receiver
• Demonstrate video applications together with HDMI
• Interface MAX 10 FPGAs to LPDDR2 memory at 200 MHz performance
• Interface to daughter cards and peripherals using Digilent Pmod
™
Compatible connectors
• Bridge to external devices through single-ended and LVDS through-hole vias
• Measure FPGA power (VCC_CORE)
• Reuse the kit's PCB board and schematic as a model for your design
Board Component Blocks
The MAX 10 FPGA 10M50 Evaluation Kit features the following major component blocks. For a detailed
description of the board components, see "Board Components" section on Page 3-1.
• Featured Devices
• MAX 10 FPGA - 10M50D, dual supply, F484 package (P/N: 10M50DAF484C6GES)
• MAX II CPLD - EPM1270M256C4N (On-board USB Blaster II)
• Enpirion EP5348UI - 400mA PowerSoC Synchronous Buck Regulator with Integrated Inductor
• Enpirion EP5358xUI - 600mA PowerSoC DC-DC Step-Down Converters with Integrated Inductor
• Enpirion EN5329QI/EN5339QI - 2A/3A PowerSoC Low Profile Synchronous Buck DC-DC
Converter with Integrated Inductor
• FPGA configuration
• Embedded USB-Blaster II (JTAG)
• Optional JTAG direct via 10-pin header
• On Board clocking circuitry
• 25 MHz single-ended, external oscillator clock source
• Silicon Labs Si510 crystal oscillator
• Silicon Labs Si5338 clock generator with programmable frequency GUI
• Memory devices
• 64M x 16 1Gbits LPDDR2 with soft memory controller
• 512Mbits Quad Serial Peripheral Interface (Quad SPI) Flash
©
2016 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134
