manualshive.com logo in svg

Altera JESD204B IP CORE, User Manual

Share
Download
Altera JESD204B IP CORE User Manual Download Page 137

Note: For more information about the JESD204B design example testbench, refer to the 

README_DESIGN_

EXAMPLE.txt

 file located in the <

example_design_directory

>

/ed_sim

 folder.

To run the Tcl script using the Quartus II sofware, follow these steps:
1. Launch the Quartus II software.

2. On the View menu, click Utility Windows and select Tcl Console.

3. In the Tcl Console, type 

cd <example_design_directory>/ed_sim

 to go to the specified

directory.

4. Type 

source gen_ed_sim_verilog.tcl

 (Verilog) or 

source gen_ed_sim_vhdl.tcl

(VHDL) to generate the simulation files.

To run the Tcl script using the command line, follow these steps:
1. Obtain the Quartus II software resource.

2. Type 

cd <example_design_directory>/ed_sim

 to go to the specified directory.

3. Type 

quartus_sh -t gen_ed_sim_verilog.tcl

 (Verilog) or 

quartus_sh -t

gen_ed_sim_vhdl.tcl

 (VHDL) to generate the simulation files.

Simulating the JESD204B IP Core Design Example

By default, the Quartus II software generates simulator-specific scripts containing commands to compile,

elaborate, and simulate Altera IP models and simulation model library files. You can copy the commands

into your simulation testbench script, or edit these files to add commands for compiling, elaborating, and

simulating your design and testbench.
To simulate the design using the ModelSim-Altera SE/AE simulator, follow these steps:
1. Start the ModelSim-Altera simulator.

2. On the File menu, click Change Directory > Select <

example_design_directory

>/ed_sim/testbench/

mentor.

3. On the File menu, click Load > Macro file. Select run_tb_top.tcl. This file compiles the design and

runs the simulation automatically, providing a pass/fail indication on completion.

To simulate the design using the VCS MX simulator (in Linux), follow these steps:
1. Start the VCS MX simulator.

2. On the File menu, click Change Directory > Select <

example_design_directory

>/ed_sim/testbench/

synopsys/vcsmx.

3. Run run_tb_top.sh. This file compiles the design and runs the simulation automatically, providing a

pass/fail indication on completion.

To simulate the design using the Aldec Riviera-PRO simulator, follow these steps:
1. Start the Aldec Riviera-PRO simulator.

2. On the File menu, click Change Directory > Select <

example_design_directory

>/ed_sim/testbench/

aldec.

3. On the Tools menu, click Execute Macro. Select run_tb_top.tcl. This file compiles the design and

runs the simulation automatically, providing a pass/fail indication on completion.

Generating the Design Example For Compilation

Use the 

gen_quartus_synth.tcl

 script to generate the JESD204B design example for compilation.

Note: If you use the Quartus II Tcl console to generate the 

gen_quartus_synth.tcl

 script, close all Quartus

II project before you start generating.

5-56

Simulating the JESD204B IP Core Design Example

UG-01142

2015.05.04

Altera Corporation

JESD204B IP Core Design Guidelines

Send Feedback

Summary of Contents for JESD204B IP CORE































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands