Operating
139
0000010038-003- GB
Operating
Adjusting a two-part scoring blade
The cutting width of the scorer should be set to the cutting width of the main
saw blade (+ 0.05 mm). Carry out the adjustment toward the left side of the
main saw blade. The cutting width is adjusted with the spacing discs that are
supplied.
Attention!
The following must also be observed when using RAPIDO scoring blades
with infinitely variable cutting width adjustment:
•
Failure to comply with the operating instructions inadmissibly redu-
ces Health and Safety at Work and excludes any claims for liability.
•
Incorrect use and use other than that intended is forbidden.
•
Permissible cutting widths 2.8 - 3.8 mm
•
Take particular caution when unpacking and packing the adjustment
unit, danger of injury!
•
Only store the adjustment unit in the original packaging!
•
Fit the scoring blade outside of the machine.
•
Make sure that all connection elements are fitted.
•
Only use original spare parts in the case of loss or damage to the
connection elements!
Summary of Contents for F45 ProDrive
