Altai Technologies Ltd. All rights reserved
A8 Installation Guide_ R3 Hardware Platform
TPS13-010_rev1.0
4.
Connect an RF cable from the 5G antenna RF port to the A8 BTS RF port “a”.
Table 11-1
5.
It is recommended to seal the RF cable-to-A8 BTS connections and RF cable-to-
antenna connections with weatherproof materials to get the best performance,
Figure 11-3. Please refer to Section 12 for details.
6.
Any unused antenna RF port or A8 BTS RF port should be protected with a
weatherproof N male dust cap.
Figure 11-1 A Weatherproof N Male Dust Cap with Chain
Note:
After installation, configure the 5GHz radio through the web-admin, including
add the MAC address of the 5GHz antenna in another A8 / A0 that is running
backhaul with and set the distance of between the two antennas. Please refer to
A8 Configuration Manual for details.
Figure 11-2 Connecting to antenna
