manualshive.com logo in svg

Alstom iSTAT M355, Manual, Page: 16 / 154

Share
Download
Alstom iSTAT M355 Manual Download Page 16

M3x5/EN M/B 

User Manual

 
Page 14 

 

iSTAT M3x5

 

 

7.5 

Measurements 

The 

M3x5

 family is ideally suited to applications where continuous Power Quality monitoring 

is required. 

TABLE 7-1 summarises the measurements available. The 

M3x5

 can be user configured for 

either single or three phase connection. 

TABLE 7-1 : MEASUREMENTS 

M3x5 

V, I, P, Q, S, PF, PA, F, 

 

 

Energy kWh class 0.2S 

 

Maximum demand  

 

Minimum values: V, I, P, Q, S, PF, PA, F, 

 

 

Maximum values: V, I, P, Q, S, PF, PA, F, 

 

 

THD (actual, min, max) 

 

Harmonics (up to) 

63

rd

 

Flicker, voltage fluctuations, Interharmonics 

 

 

7.6 

Hardware features 

The 

M3x5

 family has a number of hardware features that are designed to make the 

installation, commissioning and use of the meters as simple as possible, see TABLE 7-2.  

It has a large 128 x 64 pixel Liquid Crystal Display (LCD) that can display information in a 
number of different font sizes and is backlit for use in conditions with a low light level. The 
menu is driven locally by a 5 key function pad on the front of the meter and the 

M3x5

 family 

has the ability to customise the display and key functions to enable the user to retrieve 
information as quickly as possible.    

The 

M3x5

 has 3 LED indicators that indicate the status for a number of functions; Steady 

RED for Memory Card activity; blinking GREEN for communications activity and blinking 
RED for an alarm condition.      

The 

M3x5

 has an auto ranging current and voltage measurement inputs so that it can be 

used in most site conditions without the need to specify connection information at the order 
stage.  

The 

M3x5

 has 8 energy counters and a real time clock so that it supports comprehensive 

energy management applications. 

The 

M3x5

 has 8MB of internal memory to support the data recording and Power Quality 

Analysis functions. 

 

The 

M3x5

 supports a Memory Card with capacity up to 2GB which is used to transfer 

settings and extract records from the 

M3x5

. This means that the 

M3x5

 can download Power 

Quality records and have settings made off line and up/downloaded via a Memory card using 
the front card access port. The slot is protected by a cover to prevent humidity and dust 
ingress.    

Summary of Contents for iSTAT M355



























































































































































Reviews:

No comments