13
Eco/Classic Installation Guide and Technical Specification
12
Fit side rail end caps
Unpack the side rails (OP012) from their box. Lay all four
side rails on the floor. Fit the plastic end caps (OP018) to
both ends of the rails. The easiest
way to put the end caps on is to
use the bottom of the side rail as a
leading edge (as pictured).
2. Installation and Commissioning
Fit side rails to headboard
At the head end of the bed, press the triangular latch to
release the side rail runner, bringing it down to its lowest
position. The steel fingers should now be at the bottom
of the channel. Fit the wooden side rails onto the side rail
runner by sliding the fingers all the way into the wood of
the side rails. The side rail runner fingers go into the top
and bottom holes of the side rail.
13