ALPINE HCE-C300R_EN 68-18693Z26-B (A5)
8
-EN
Display of Detected Object
The display when an object is detected differs
depending on image configurations.
When there are lots of objects present, such as in a
crowd of people, the outer frame light will blink as a
warning. Individual objects will not be detected.
Because this camera system detects objects based on
a Panorama View image, warnings can occur even if
an object does not show on the Ground View / Rear
View screen.
Panorama View Display
Indications
A small box appears on an object that enters the
camera’s view. The box follows the object moving
through the display.
The box represents the objects approximate position
relative to your vehicle. There may be times when
the box does not appear or does not follow the object
accurately.
When an object is detected, the screen is
enclosed by a red frame (first time only). An
alarm also starts to sound.
The system boxes off the object in red.
•
•
e
•
The warning ends when the object comes
directly behind the vehicle. No warning also
occurs when the object moves away from the
vehicle.
Rear View Display Indications
A triangle mark appears on the leftmost or
rightmost side of the screen, indicating that an
object is approaching from a side. After the object
appears on the screen, a small box appears at the
approximate location.
When an object is detected, the screen is
enclosed by a red frame (first time only). An
alarm also starts to sound.
If the object comes into the warning area, a
red triangle arrow appears.
e
Whe
syst
The
dire
occu
vehi
G
A tri
right
objec
Whe
encl
alar
If th
red t
e
