Safety Notes
Review the drawings and illustrations contained in this manual before proceeding. If there are any questions
regarding the safe installation or operation of the system, contact Alpha Technologies or the nearest Alpha
representative. Save this document for future reference.
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this manual. Where these symbols appear, use extra care and
attention.
WARNING presents safety information to PREVENT INJURY OR DEATH to the technician
or user.
The use of CAUTION indicates safety information intended to PREVENT DAMAGE to material or
equipment.
The use of ATTENTION indicates specific regulatory/code requirements that may affect the placement of
equipment and /or installation procedures.
A NOTE provides additional information to help complete a specific task or procedure.
Safety Precautions
Only qualified personnel may service the XM2-300HP CableUPS
•
®
.
Verify the voltage requirements of the equipment to be protected (load), the AC input voltage to the power
•
supply (line), and the output voltage of the system prior to installation.
Equip the utility service panel with a properly rated circuit breaker for use with this power supply.
•
When connecting the load, DO NOT exceed the output rating of the power supply.
•
Always use proper lifting techniques whenever handling units, modules or batteries.
•
The XM2-300HP Power Supply contains more than one live circuit! Even though AC voltage is not
•
present at the input, voltage may still be present at the output.
If batteries are being stored prior to installation, recharge per manufacturer’s specifications to ensure
•
optimum performance and maximum battery service life.
Reduce the chance of spark and wear on the connectors; always switch the inverter’s battery circuit
•
breaker off before connecting or disconnecting the battery pack
The battery pack, which provides backup power, contains dangerous voltages. Only qualified personnel
•
should inspect or replace a battery.
In the event of a short-circuit, batteries present a risk of electrical shock and burns from high current.
•
Observe proper safety precautions.
Always wear protective clothing, insulated gloves and eye protection (i.e. safety glasses or a face shield)
•
whenever working with batteries.
Always carry a supply of water, such as a water jug, to wash the eyes or skin in the event of exposure to
•
battery electrolyte.
ATTENTION:
NOTE:
CAUTION!
WARNING!
7
017-877-B1-001 Rev. A
