10
►
Method 2
If the diamond blade cannot insert from the blade slot.
1.
Remove the Height Adjustment Knob (Fig. 6) and loosen the
Knob Bolt (Fig. 7)
2. Open the Dust Collection Cover and the setting plate. (Fig. 8)
3.
Insert the inner flange with the spacer as needed and place the
diamond blade on the inner flange, then tighten the locknut using
the supplied pin wrench. (Fig. 9)
4.
Slide the Dust Collection Cover to the closed position and re-
attach the Height Adjustment Knob.
Blade
