3
INTRODuCTION
Thank you for purchasing the Alpha
®
Ecoguard Type W6 Dust Collection Cover. The
Ecoguard Type W6 must be used with a vacuum, or other Dust Collection System.
To ensure correct use, read this Instruction Manual and the Instruction Manual for
the power tool and follow the operating instructions. Keep this manual in a place
where operators can access it easily whenever necessary!
ABOUT THE SyMBOLS
According to the hazard level, all safety notes in this manual are classified into
“DANGER”, “WARNING”, and “CAUTION”.
DANGER!
Death or serious personal injury is imminent when handling
this Dust Collection Cover incorrectly.
WARNING! There is a possibility of death or serious personal injury when
handling this Dust Collection Cover incorrectly.
CAUTION!
There is a possibility of personal injury or property damage
when handling this Dust Collection Cover incorrectly.
Note: In some situations, failing to observe WARNING notes could result in
death or serious personal injury. Be sure to read and observe the safety
notes to ensure safety and correct use of the
Dust Collection Cover
.
PRECAUTIONS FOR USING THE DUST COLLECTION COvER
1. The Dust Collection Cover is for use with a 4.5” (115mm), 5” (125mm) and
6” (150mm) high-speed angle grinders.
2. The Dust Collection Cover is designed for cutting concrete, natural stone,
engineered stone, sintered slabs, porcelain paver tiles and other masonry
products. Do not use when cutting metal or other materials.
3. The Dust Collection Cover is solely designed for use with a diamond cutting
blade. Do not use with any other type of blade such as a conventional
abrasive wheel or carbide tip saw blade.
4. Always check the Dust Collection Cover for damage, cracks or deformation
before starting work. Do not use the Dust Collection Cover if it is damaged,
cracked or bent as this could cause to injury.
5. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or
hearing protection must be used for appropriate conditions.
6. Keep the Dust Collection Cover away from gasoline, thinner, petroleum
and paraffin.
7. The supplied connector may not connect securely to every high-speed angle
grinder. In this case, do not use the Dust Collection Cover.
