8
INsTAllING TO OThER hIGh-sPEED ANGlE
GRINDERs WITh INCluDED OThER CONNECTIONs
®
®
®
®
®
®
BOSCH®
HITACHI®/ FEIN®
FEIN®
If you install the Dust Collection Cover to a high-speed angle grinder
but the connector is loose and cannot be securely attached, it may
be necessary to change the connector designed for other makes.
1.
Remove the three phillips screws in the connector attached to
the Dust Collection Cover. (Fig. 3)
2. Attach the supplied connector by following the instruction in (1)
above in reverse. (For Hitachi
®
& Fein
®
Grinders use Part No.
500070 / for Metabo
®
, Bosch
®
& Fein
®
use Part No. 500027 / for
Flex
®
use Part No. 500071 / for Dewalt
®
use Part No. 500072)
3.
Subsequent procedures are the same as for attaching the adapter
to a high-speed angle grinder in case changing the connector
is not needed.
