manualshive.com logo in svg

Alpha Cordex HP CXRF 48-2.4kW, Manual

Share
Download
Alpha Cordex HP CXRF 48-2.4kW Manual Download Page 7

0100037-J0     Rev D

6

User Guide

Cordex HP 2.4kW / 3.0kW Modular Switched Mode Rectifier

2.  Introduction

2.1  Scope of the manual

This manual explains the installation, interconnection, and operation of:
• 

Cordex HP 3.0kW rectifier systems 

• 

Cordex HP 2.4kW rectifier systems.

2.2  Product overview

A complete rectifier system consists of one or more power modules in a common shelf enclosure. The shelf has 

connections for AC inputs, DC output, and system communications. The wide AC input operating range for global 

installations and wide operating temperature ranges for installation in uncontrolled environments along with high 

efficiency (>96%) reduces the carbon footprint and the operating expenses.
Cordex rectifier modules use a high frequency, switched mode conversion technique to provide a fully regulated 

and isolated DC output from the AC mains. Multiple 48V configurations are available up to 312.5A in a compact 

1RU shelf system. Industry leading power density (35W/in

3

) yields more space for revenue generating equipment. 

Rectifier power modules are “hot swappable”—they can be inserted or removed from the shelf without cutting 

power to or from the system or the load. Additional power modules can be included with the system at the time of 

ordering or added after the shelf has been installed.

The shelf rectifier system is designed to operate with the Cordex System Controller (CXC). This controller allows 

the user to configure, monitor, and control the entire DC power system from its touch screen display which 

includes temperature compensation, auto equalization, remote access, dial out on alarm, battery diagnostics, 

as well as Web server and SNMP support for configuration and monitoring. Details of controller operation are 

provided in the current version of the related software manual.
External system controller models communicate with the shelf via RJ12 shelf connectors. In a power system, up 

to five rectifier shelves can be stacked and connected to the same controller. The latest Cordex HP controller, 

featuring touch screen, color LCD display with front Ethernet and USB connectors, is available as a panel mount 

controller or as part of the CXPS-E3 system.

Shelf ID location technology is built into the 

Cordex HP 3.0kW rectifier

. This feature is capable of remotely 

locating the exact position of a rectifier within a large system. This can be useful for quickly locating a unit during a 

service interruption or when a unit has failed.

Figure 1  — 

Cordex HP 19 inch rectifier shelf

Summary of Contents for Cordex HP CXRF 48-2.4kW

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands