Alpha Professional Tools VSP-120, Instruction Manual

Page: 8 / 36

6
•
Use only accessories that are recommended by the manufacturer for your
model
. Accessories that may be suitable for one tool, may become hazardous
when used on another tool.
SErViCE
1.
Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.
2.
When servicing a tool, use only identical replacement parts.
Follow
instructions in the Maintenance section of this manual. Use of unauthorized
part or failure to follow Maintenance Instructions may create a risk of electric
shock or injury.
SPECiFiC SAFETY rULES
1.
Accessories must be rated for at least the speed recommended on the
tool warning label
. Wheels and other accessories running over rated speed
can fly apart and cause injury.
2.
Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact
with a “live” wire will make exposed metal parts of the tool “live” and shock
the operator.
3. Know your power tool. Read operator`s manual carefully.
Learn its
application and limitations, as well as the specific potential hazards related
to this tool. Following this rule will reduce the risk of electric shock, fire, or
serious injury.
4.
Always wear safety glasses with side shields.
Everyday eye-glasses have
only impact resistant lenses; they are NOT safety glasses.
5.
Protect your lungs. Wear a face or dust mask if the operation is dusty.
6.
Protect your hearing. Wear hearing protection during extended periods of
operation.
7.
Inspect tool cords periodically and if damaged, have repaired at your
nearest Factory Service Center or other Authorized Service Organization.
Constantly stay aware of cord location.
8.
Check damaged parts.
Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function.
9. Check for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect its operation, A guard
or other part that is damaged should be properly repaired or replaced by an
authorized service center.