10
VSP-120 VARIABLE SPEED WET POLISHER OPERATION
Always be sure that the tool is switched off and unplugged before adjusting or
checking function on tool.
MAiN CONNECTiON
Connect only to single-phase AC current supply and only to the main voltage
specified on the rating plate.
SwiTCHiNG ON AND OFF
Before plugging in the tool, always check the working voltage be sure that the voltage
specified is on the name plate. Before plugging in the tool, always check to see
that the slide switch actuates properly and returns to the “OFF” position when the
rear of the slide switch is depressed.
Switching on:
Switch can be locked in “ ON” position for ease
of operator comfort during extended use. Apply
caution when locking tool in “ON” position and
maintain firm grasp on tool. Push power switch
to the forward position until it locks into position
as shown in Figure 3.
Switching off:
Push down on power switch to release to the
rear position as shown in Figure 4.
DANGER!
DANGER!
Figure-3
ON POSITION
OFF POSITION
Figure-4
Summary of Contents for VSP-120
Page 27: ...25 ALPHA VSP 120 SCHEMATIC ...
