Alpha Professional Tools VSP-120, Instruction Manual

Page: 10 / 36

8
GrOUNDiNG iNSTrUCTiONS
This tool should be grounded while in use to protect the operator from electric shock.
The tool is equipped with a three-conductor cord and three-prong grounding type
plug to fit the proper grounding type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire. Never connect the green (or green and
yellow) wire to a live terminal.
ADDiTiONAL PrECAUTiONS FOr USiNG THE VSP-120
In addition to the general safety notes described on the preceding pages, please
read and observe the following precautionary notes before using the polisher.
DANGER!
1.
Check the working voltage.
Be sure the voltage available at power outlet matches specified voltage on
the name- plate. If the polisher is used with higher voltage than specified, the
motor will burnout. Any attempts to do so may damage the polisher or cause
an accident or injury.
2.
Inspect all polishing discs.
Never use cracked, chipped or damaged polishing discs.
3.
Hold the polisher tightly at start-up.
Failure to do so may cause an injury due to high impact at initial start up.
4.
Stop using the polisher immediately when noticing any malfunctions or
any suspicious abnormal noises.
Turn the power switch OFF and contact your dealer or Alpha Professional
Tools
®
for repair.
5. Handle the polisher with care.
If you accidentally drop the polisher, do not use it until checking that it is not
cracked, deformed, or damaged in any way.
6.
Do not pour water or any liquids onto or inside the polisher.
It may cause electric shocks.
7. Do not hold the polisher in a vice.
8.
Do not touch any rotating parts.
Never touch the polishing disc of the polisher during operation with your
hands.