Page
56
to
71
Remote panel
The remote panel enables the remote monitoring of the UPS and gives a real time
detailed summary of the machine status. The device ensures that the operator can
monitor the electrical values of the mains power, outputs, batteries, etc. and locate any
alarm conditions.
For further information regarding the connection and use of this device, please refer to
its dedicated user manual.
Parallel
All SEUPS can be paralleled with other units of the same size
through an optional parallel board, to be inserted within the
dedicated slot.
It is possible to join in parallel up to four single-phase units and up
to eight three-phase units.
For further information about the parallel feature, please refer to
the relative “Parallel kit” user manual.
Optional slot boards
The UPS is equipped with two expansion slots for accessory communication or I/O expansion boards that enable
the equipment to communicate using the main communication standards.
Some examples:
Second RS232 port
Serial duplicator
Ethernet agent with TCP-IP, HTTP and SNMP protocol
RS232 + RS485 port with JBUS / MODBUS protocol
Additional digital inputs
Additional output dry contacts
For further information on the available accessories, refer to the latest catalogue or visit the web site.
Front Door Air filter
An on-site installation special door is available as a kit with special dust filtering on the XTEND – XTD UPS series.
This kit is designed for UPS located within a dusty environment.
The adding of the filter, if correct maintenance works are carried out, does not reduce the performance of the UPS (No
power derating).
Regularly clean the air filter according to the environmental conditions.
IP30 Version
This option, available upon request (prior to UPS purchase) on the XTEND – XTD cabinet only, provides the UPS
with a degree of protection up to IP30.
