4. To see a specific event, type
eventX
where X is from 1 to 200 and press
Enter
. To see a range of events
(for example, events 20 to 30), type
eventX-X
where X are events from 1 to 200 and press
Enter
. To clear
the log, type
eventclr
and press
Enter
. It takes the Alpha FXM 30 seconds to clear the log. Do not enter
any other commands during this time.
5. To see a specific event, type
eventX
where X is from 1 to 200 and press
Enter
. To see a range of events
(for example, events 20 to 30), type
eventX-X
where X are events from 1 to 200 and press
Enter
.
6.5.12 Restoring All Parameters to Default Values
The purpose of this command is to reset the Alpha FXM to the factory default state. See Table D on page 36 for a
list of parameters that will be restored to their default values.
CAUTION!
This command resets all parameters that are user-configurable. All previously programmed operation will
be lost. Implement a backup plan for mission critical operations.
Procedure
1. Type
default:all
and
press Enter
.
2. Alpha FXM returns
*
OK
as confirmation.
Page
74
to
95
