EVENT STAT
MENUS
120/60/N
LINE
Table C — System Status Menu
LCD display
Meaning
Description
INV (min)
Amount of time
inverter was on
Shows total time in minutes the inverter has been active since the last
time the inverter timer was cleared. See INV RECORD description in
Table B.
BUCK/BOOST
Buck/Boost
count
Number of times FXM goes into Buck and Boost mode
SHED TIMER1
Amount of time
(in seconds)
until the dry
contact is
activated.
The factory default dry contact for this setting is contact C4. SHED
TIMER2 and SHED TIMER3 can be field programmed. The factory default
setting is 2 hours, To change the setting see "UPS Maintenance > Relay
SHED TIMER2
SHED TIMER3
MAC Address
FXM MAC
FXM MAC address
IP Address
FXM IP
FXM IP
kWh
kWh Meter
Accumulated output energy
Remain Tm
Remaining
Battery Runtime
Remaining runtime of the battery (standard charging method)
Serial Number
Unit Serial
Number
Unit serial number of the Alpha FXM
VERSION
Software
Version
Software version used in this Alpha FXM
6.2.5. Viewing the 200-Event Log
Use the LCD display to view up to the last 200 events, and the malfunctions that triggered each of them. If more
than 200 events occurred, the oldest is overwritten. The 200-event log cannot be cleared in the LCD menus.
Procedure
1. From the Logo screen, navigate to the
EVENT STATUS MENU
.
2. Press the
SELECT
button to enter the
submenu.
Page
29
to
95
