SNQ-60x0-320F Series Data Center Switch
Hardware Installation Guide
2
Introduction
Switch Description
The SNQ-60x0-320F Series Data Center, Top-of-Rack (ToR) switches, with a total combined bandwidth of 2,560 Gbps,
feature 32 ports of 40 Gbps Ethernet wire-speeds or up to 104 ports of 10 Gbps Ethernet wire-speeds. The Layer 3
capable, bare metal system also provides an RJ-45 and a Micro-USB console port and an Out-Of-Band (OOB)
management port. Administrators can access the Command Line Interface (CLI) through either the RJ-45 console port
or the Micro-USB console port. When both console ports are active, the Micro-USB console port will be given priority.
The SNQ-60x0-320F Series features two switches in the series distinguished only by the CPU used. The
SNQ-6070-
320F
uses the Freescale CPU and the
SNQ-60A0-320F
uses the Intel CPU.
Package Contents
After purchasing any of the switches in this series, the following items will be included in the package:
One SNQ-60x0-320F Series Switch (This includes 1 power supply module and 4 fan modules).
One Quick Installation Guide.
One AC power cord.
One RS-232-to-RJ45 console cable.
One Micro-USB-to-USB console cable.
One pair of frontal rack-mount brackets.
One pair of rack-mount slider brackets.
Four rubber feet with adhesive patches.
Eight Phillips-head frontal rack-mount bracket screws.
One warranty card.
Note:
If any of the above mention items was not found inside the package contents of this switch or are
damaged in any way, contact your reseller immediately.
Software Features
Switches within this series are known as bare metal devices. This means that this switch does not have any software
pre-loaded on it.
