27
Subject to change without notice | 83050400fUK – Translation into English of the original German operating manual | ait-deutschland GmbH
NOTICE.
Once the heat pump, the heating circuit and the
hot water circuit have been rinsed, the bleed
program of the heating and heat pump regulator
must be started, after the control element has
been mounted.
Insulating the hydraulic
connections
Insulate the vibration decouplers and the pipes of the
heating circuit.
NOTICE.
Insulate in accordance with applicable local
standards and directives.
Installation of the control
element
Situated at different heights in the front facade of the
unit are recesses (each with 4 recesses) for fastening the
control element:
1 four upper recesses
2 four lower recesses
4 hooks are located on the back side of the control
element and can be used to hang the control element on
the front facade of the unit:
Hang the control element's hooks on the recesses
of the front facade (either in the upper or lower
recesses)…
Example: Control element in upper recesses
Push the control element down until it locks into
position…
