Alpha-InnoTec LW 161H/V, Operating Manual

Page: 9 / 48

9
Subject to change without notice | 83061600bUK | ait-deutschland GmbH
15.1 Main components
1 fan
2 switch
1 evaporator
2 electric heating element
3 compressor
4 condenser
16 Installation and assembly
The following applies to all work to be done:
NOTE
Always comply with the relevant local
accident prevention regulations, statutory
regulations, guidelines and directives.
NOTE
Note the sound information for the respective
model.

“Technical data / Scope of supply”, page 27,
“Sound” section
NOTE
The noise emissions of the heat pumps
must be taken into account in the respective
installation plans for air/water heat pumps.
The respective regional regulations must be
observed.
Installation room and space requirements
NOTE
Note and follow the local regulations and
standards regarding the installation room and
space requirements. The table shows the
regulations according to EN 378-1 relevant
in Germany.
Refrigerant Limit value [kg/m³]
R 134a 0.25
R 404A 0.52
R 407C 0.31
R 410A 0.44
R 448A 0.39

“Technical data / Scope of supply”, page 27,
“General unit data” section
Minimum room volume =
Refrigerant capacity [kg]
Limit value [kg/m³]
NOTE
If several heat pumps of the same type are in-
stalled, only one heat pump need to be taken
into account. If several heat pumps of differ-
ent types are installed, only the heat pump
with the largest refrigerant volume needs to
be taken into account.