Alpha-InnoTec LW 161H/V, Operating Manual

Page: 8 / 48

8
Subject to change without notice | 83061600bUK | ait-deutschland GmbH
15 Scope of supply
Example of scope of supply packaging:
View 1:
View 2:
Unit with hermetic compressor, all
safety-relevant components for cooling
circuit monitoring, installed heating and
heat pump controller, sensors installed
in the unit to record the hot gas, heating
water flow and return temperature as
well as hose for condensate discharge
(connected on the heat pump side)
Integrated circulation pump:
UPM GEO 25-85 180 PWM
1. Check the delivery for outwardly visible signs of
damage.
2. Check to make sure that the delivery is complete.
Any defects or incorrect deliveries must be report-
ed immediately.
NOTE
Note the unit model. Check the direction in
which the air from the unit is discharged.
Units with the letter L in their model identifier
blow out the air on the left (viewed from the
operating side).
Functionally necessary accessories
IMPORTANT
Use only original accessories made by the
manufacturer of the unit.
You must order the air ducts (with air duct accessories)
separately.
Additional accessories
You must order separately:
● installation accessories (vibration decouplers)
for air/water indoor installation heat pumps
● air / magnetic sludge separator