19
We reserve the right to make technical changes | 83055600dUK – Translation of the original instruction manual (HMD 2) | ait-deutschland GmbH
Query building services management system (BMS)
The menu is not shown in full here.
NOTE
If 2 heat pumps are connected, note the number displayed in
the top menu row. It provides information about which heat
pump is currently addressed.
In order to change the addressed heat pump: page 11,
“Changing the addressed heat pump in submenus“
NOTE
Data is only displayed if the heat pump is integrated into a
building management system. This requires a special con-
figuration of the heating and heat pump controller with
additional software that is subject to a charge.
Operating manual “Connection to a building services man-
agement system via BACnet/IP | ModBus/TCP”
Query Smart
NOTE
Menu entry is only displayed if customer service access is
activated and if:
●
Menu entry “room stat.” is set to “Smart”
●
“Smart“ settings have been made.
page 23, “Determining system setting“, “room stat.”
page 30, “Smart“
The menu is not shown in full here.
NOTE
If 2 heat pumps are connected, note the number displayed in
the top menu row. It provides information about which heat
pump is currently addressed.
In order to change the addressed heat pump: page 11,
“Changing the addressed heat pump in submenus“
set temperature HC
Setpoint temperature heating circuit
set temperature MC1
Setpoint temperature mixing circuit 1
Targ. service water
Set point temperature domestic hot
water preparation
target value max
Highest requirement setpoint from the
Smart system
UFH total HC
Number of floor heating circuits
assigned to the heating circuit
UFH open HC
Number of open floor heating circuits
assigned to the heating circuit
numb.actuat. HC
Number of radiator drives assigned to
the heating circuit
Query heat quantity
Many heat pump types are equipped with heat quantity record-
ing by pressure sensors in the cooling circuit of the heat pump. In
these heat pumps the heat quantity can be read out directly.
NOTE
If 2 heat pumps are connected, note the number displayed in
the top menu row. It provides information about which heat
pump is currently addressed.
In order to change the addressed heat pump: page 11,
“Changing the addressed heat pump in submenus“
Heating
Recorded heat quantity for heating
DHW
Recorded heat quantity for domestic
hot water
total
Sum of the heat quantity supplied by
the heat pump
since:
Reset with date indication
By clicking on the menu line with
the date, the heat quantity meter in
this and the following menu lines are
reset to zero and the current date is
automatically entered. In this way the
heat quantity can be recorded for a
period defined by you (start date =
displayed date)
since Reset:
Reset without date indication
By clicking on this menu line, the heat
quantity meter in this menu line is reset
to zero.
NOTE
Depending on the system configuration, further entries
may appear for heat quantities recorded (e.g. for second
heat generator, swimming pool heating, …).
